Hey all - Newbie to the forum as we recently purchased a 2008 25LRK. We love this trailer, but there something I can't figure out. The owner's manual
says the manual slide crank should be in the frame opposite the slide, but I can't find it - not there or anywhere. I don't need it yet, but when I do,
I want to know where it is! Thanks in advance for any help you can give.
2008 25LRK - Where is the manual slide crank??
| Author | Comment | ||
|---|---|---|---|
 JoeyL |
2008 25LRK - Where is the manual slide crank?? |
Lead | |
|
Posts: 1 (04/10/09 18:37:12) |
|
||
|
warofroses |
Welcome to the forum | ||
|
Posts: 44 (04/11/09 05:41:45) |
 I do not know where your crank port might be but on my unit the bedroom crank port is
under the bed and on the living room slide it is behind the entry steps. Keep looking, you should be able to find the port or rod protruding on the opposite
side from the slide.
Good luck and welcome. Bob
2004 OR 316RLS
1995 Dodge Cummins 2500 - Pullrite Super 5, DTT tranny, 4" exhaust, PAC Brake, Bilstine shocks, TST #5 Cam plate, Cool air intake mods..... |
||
|
syscokid397 |
|||
|
Posts: 8 (05/05/09 16:42:54) |
I HAVE THE SAME PROBLEM ON MY 2005 PILGRIM. I CALLED PILGRIM ABOUT IT WHEN THEY WERE IN BUSINESS AND SAID THAT I EITHER HAVE TO DRILL A HOLE IN THE FRAME OR FIND A WRENCH THAT WOULD FIT IN BETWWEEN THE DRIVE MOTOR AND INSIDE FRAME |
||
|
4kidsgonewild |
Manual Crank | ||
|
Posts: 60 (05/06/09 06:10:31) |
Hi,
My name is Jim, We do a lot of the repairs for the for the Pilgrim owners.We were at Pilgrim when the doors closed.The one thing I need to know is,do you have the chain drive system on your slide or slides? If so you won't have a port to get to it you use a different method.If you have a chain drive system give me a call and I will explain it.Because if you are not looking at it while I walk you through it (It won't make sense) at any rate if there is anything else I can do for you please contact me at team61@verizon.net or call (574) 533-5207. Thank You Jim Skiles |
||
